Narda-MITEQ - Microwave RF Components Manufacturer

You are here: Home / Ka-Band Components / Ka-Band Waveguide / Adapters / Waveguide To Waveguide Transition Adapters

Waveguide To Waveguide Transition Adapters

Waveguide To Waveguide Transitions for Ka-Band

Waveguide To Waveguide Transition Adapters

Narda-MITEQ manufactures Waveguide to Waveguide Transition Adapters covering the Ka-Band frequency range for Rectangular Wave guides, with multiple flange configurations available. 

For more information feel free to call us and discuss your needs with one of our design engineers.

Rectangular to Rectangular Waveguide
Adapters in Overlapping Bands
Ka-Band, Downlink 18.3-20.2 Ghz, Uplink 27.5-31.0 GHz
Waveguide To Waveguide Straight Transition Adapter
Waveguide To Waveguide Straight Transition Adapter
WG Size Optimum Freq Range GHz Insertion
Length (In)*		 VSWR Standard Model
Number
WR51 to WR62 15.0 - 18.0 2.0 1.17 51/62ka-2-6-6
WR51 to WR62 15.0 - 18.0 4.0 1.08 51/62ka-4-6-6
WR42 toWR51 18.0 - 22.0 2.0 1.17 42/51ka-2-6-6
WR42 toWR51 18.0 - 22.0 4.0 1.10 42/51ka-4-6-6
WR34 to WR42 22.0 - 26.5 2.0 1.17 34/42ka-2-6-6
WR34 to WR42 22.0 - 26.5 4.0 1.10 34/42ka-4-6-6
WR28 to WR34 26.5 - 33.0 4.0 1.17 28/34ka-4-6-6

 

Rectangular to Rectangular Waveguide Adapter Specials
Ka-Band, Downlink 18.3-20.2 Ghz, Uplink 27.5-31.0 GHz
WG Size Insertion
Length (In)*		 Standard Model
Number
WR51 to WR90 7.0 51/90ka-7-6-6
WR51 to WR75 6.0 51/75ka-6-6-6
WR42 to WR90 8.0 42/90ka-8-6-6
WR42 to WR62 4.0 42/62ka-4-6-6
WR42 to WR62 1.0 42/62ka-1-6-6
WR34 to WR90 6.0 34/90ka-6-6-6
WR34 toWR62 8.0 34/62ka-8-6-6
WR34 toWR51 4.0 34/51ka-4-6-6
WR28 to WR90 8.0 28/90ka-8-6-6
WR28 to WR62 6.0 28/62ka-6-6-6
WR28 to WR51 6.0 28/51ka-6-6-6
WR28 to WR42 6.0 28/42ka-4-6-6
Adapter Ordering Information
Ka-Band Rectangular Waveguide To Rectangular Waveguide Transition
 WR /WRka -L -F1 -F2
Example part number:  51 /90ka -7 -6 -6
Smaller Waveguide Size: (WR) WR28 thru WR90         
Larger Waveguide Size: (/WRka) WR28 thru WR90      
Length (L): Inches (Consult Factory For Non-Std Lengths)    
Smaller Flange (-F1): 1=CPRG, 2=CPRF, 6=Cover, 7=Choke    
Larger Flange (-F2): 1=CPRG, 2=CPRF, 6=Cover, 7=Choke
See Narda-MITEQ Standard Flange page for more info.

It is possible to change the flanges on the standard model numbers but the order you specify the flanges in is important.  The first flange number specified corresponds to the smaller flange.  The second  flange number specified corresponds to the larger flange.

* Size may vary due to flange combination selected